Blue House Flex Roof Paint

Acrylic Roof Paint

Suitable for application to almost any surface including...

• Roofing tiles
• Brick
• Concrete
• Asbestos
• Timber after suitable preparation
  • Preparation: surfaces should be sound, dry and free from oil, wax and grease. Remove any loose, powdery or flaking material. Surfaces, which are contaminated with lichen or moss, should be brushed clean and washed with a Fungicidal Wash and allowed to dry thoroughly before coating. Any structural repairs that may be necessary should be carried out before applying Blue House flex roof paint.

Blue House Flex Roof Coating

A flexible and elastomeric coating, quickly applied by brush, roller or spray which dries to form a high build, seamless waterproof membrane. Economically prevents or cures all types of leaking roofs, gutters and walls. Easy to apply, Blue House flex roof paint remains flexible and elastic to allow for movement of the substrate forming a long-life protective coating for weatherproofing roofs and walls.

Application

DO NOT APPLY WHEN THE AIR TEMPERATURE IS BELOW 10 CENTIGRADE.
Small-localised cracks or fractures, apply two full coats of Blue House flex over the treatment previously outlined. Where the complete roof surface is to be weatherproofed, after necessary preparation as outlined, apply two full coats of Blue House flex, allowing thorough drying between each coat.

Coverage: It is very important that Blue House flex weatherproofing system should be applied to the correct film thickness.

The spreading rate of 2 sq. metres per litre per coat should not be exceeded.Drying: Normally dry in approximately 4-6 hours.

Flash Point: Not applicable - water based.

Clean up: Warm soapy water. Clean tools and equipment with water immediately after use.